fossilesque@mander.xyz to Programmer Humor@lemmy.mlEnglish · 23 hours agoNot incorrect.mander.xyzimagemessage-square51fedilinkarrow-up1553arrow-down112cross-posted to: [email protected]
arrow-up1541arrow-down1imageNot incorrect.mander.xyzfossilesque@mander.xyz to Programmer Humor@lemmy.mlEnglish · 23 hours agomessage-square51fedilinkcross-posted to: [email protected]
minus-squareTimeSquirrel@kbin.melroy.orglinkfedilinkarrow-up4·17 hours agoSomething wrong with: #include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); } ? 😂🤮
minus-squareScrath@lemmy.dbzer0.comlinkfedilinkarrow-up6·10 hours agoObviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval
Something wrong with:
#include <Arduino.h> void loop() { digitalWrite(13, HIGH); delay(1000); digitalWrite(13, LOW); delay(1000); }? 😂🤮
Obviously the only correct way to blink an LED is to use a hardware timer to trigger a DMA transfer which stores a bit in the pin toggle register at a set interval